Industrial Air Liquid Mixing Equipment
|
Pulsair's SoftWater Bubbler System provides a soft landing cushion of aerated water for divers during training by introducing diffused air into the water below the diving boards and platform towers. The system is operated by using a small hand held remote control transmitter (radio). The coach or diving trainer can select and energize the diffuser system by simply pushing a button on the transmitter. Pushing the same button again turns the system off. The Pulsair SoftWater Bubbler System helps to reduce energy costs by operating for a pre-set number of seconds only using the air required to protect the diver for a single diver. Managed air is much more efficient than old fashioned manually operated systems. The SoftWater Bubbler System also quickly mixes the pool when chemicals are added.
Pulsair's bubbler system is a dry pipe system. Precision air regulators prevent water from entering the air line piping system. Increasing the pressure during diving meets will mark the water surface for divers with tiny bubbles.
SYSTEM COMPONENTSThere are three major components to the system, the compressor, diffusers and piping system and the controls.
Compressor The compressor is a 30 horsepower Ingersoll-Rand Rotary compressor mounted on a 120 gallon receiver. The compressor package includes coalescing and charcoal filters, a regulator and remote motor starter.
|
Diffusers and Piping System There is on Soft Water strip for the 3 meter diving board. The strip will be embedded in the pool bottom and supplied by a 2" pipe.
|
Control System There are several components to the control system, the transmitter, receiver, power supply, injection valve and interlocks. The control system will require a 115 VAC supply and a hard-wire connection between the control station and the compressor.
|
|
Remote Control Transmitter The one-channel control transmitter is similar to a television or other remote control device. The transmitter case is made of high impact plastic with a fully sealed membrane type switches to provide a dirt and moisture free environment. The unit is small and light enough to be placed in shirt pocket or hung around the neck on a lanyard. The switches are alternate action; pushing once turns the system on.
The Pulsair SoftWater Bubbler System can be installed during construction or when the finished pool is filled with water or empty.
Contact us today and learn more today about Pulsair's SoftWater Bubbler System.