Programmable Remote Station
Controller
PRSC
| PULSAIR’s Programmable Remote Station
Controller (PRSC) is a timing device for multiple tanks (24 is the largest number to
date). The system can be programmed to turn on any single or combination of tanks at
pre-determined times and for pre-determined mixing duration. It also provides intermittent mixing and displays the time remaining upon request.
Timing data is entered and/or changed through the Operator Interface Terminal (OIT). The
OIT has a keypad for data entry, and two lines of text that prompt the operator. |
|
The PRSC interfaces with the PULSAIR flat
tank, horizontal tank and v-bottom
tank mixing systems. Using the PRSC, the operator controls all of the on/off, delayed
start and intermittent mixing functions for multiple tanks from a remote location.
The PRSC has a bank of two lighted indicators
for each tank:
Programmable Remote Station Controller PRSC Working Diagram |
| The operator programs the "on/off" timing
solutions into the PRSC. The PRSC sends electrical on/off signals to the HT, FT or VTS
pneumatic controllers (must be fitted with the RC option). Dwell
and Injection Time are set at the controllers,
which send pneumatic signals that open and close injection valves.
Once the injection valve is open, compressed air flows to the accumulator
plates where the bubble is generated. |
|
|
PRSC Customers
American Oil, Lianyungang, China
Mobil Oil, Singapore
